Resolve Blink Camera Not Working

Resolve Blink Camera Not Working​ Issue Like A Pro

Generally, Blink cameras are a smart and innovative security solution. These are used indoors as well as outdoors. Similarly, if the Blink camera not working ​ occasionally, then this seems like a minor inconvenience but can put your home security at risk. So, to avoid such potential threats, it is crucial to resolve this issue on time.

Furthermore, if you do not know about the reasons behind Blink camera live view not working or similar problems, then this guide might help you a lot. Here, you explore the root causes behind the camera not working issue and easy fixes to resolve such an issue. So, to explore more, keep reading!

Causes and Troubleshooting Tips to resolve Blink camera not working

Moreover, Blink cameras are one of the most demanded security devices in the modern age. These are easy to access and configure to keep an eye on your boundaries 24×7. However, the Blink camera not working ​ issue interrupts the functioning of these CCTVs. 

So, to use these smart surveillance devices to their full extent without any hassle, troubleshoot the camera not working issue. Similarly, we share the detailed causes and solutions to understand and eradicate this issue. Now, take a closer look:

Sync Module Problems

Sync Module Problems
  • Most Blink CCTVs connect to the Sync Modules, which offer Wi-Fi connectivity and storage for the cameras. 
  • So, if this central hub lacks connectivity, then the cameras can’t work. 
  • Therefore, check the signal strength on your router and wired connections with the Sync Module.

Presence of Signal Barriers

  • Additionally, signal interruptions caused by objects such as mirrors, microwaves, furniture, and similar items near the Sync module or router can disrupt the signal.
  • This results in the Blink camera not working problem.
  • Hence, to fix this, eliminate these obstructions or relocate your networking hub to another central location.

Power Outage on the camera

Power Outage on the camera
  • However, Blink cameras rely on a sufficient power source, either using the battery or connecting a power cord.
  • Therefore, a sudden power outage on the CCTVs interrupts the camera’s working.
  • So, it is advised to charge the camera batteries timely or ensure adequate power supply on it.

The CCTV is out of the Sync Module’s range

  • Sometimes, outdoor cameras are placed far away, and the Sync Module signals can’t approach them. 
  • In this scenario, security devices can’t respond or function.
  • Hence, position the cameras within the range of the Sync Module.

Bandwidth is selected as 5GHZ

  • In general, Blink cameras can’t respond to 5Ghz bandwidth.
  • If you set the router bandwidth to this frequency, then the Blink camera not working .
  • So, check the network frequency on your router and change it to 2.4 GHz.

Technical glitches and bugs

  • Occasionally, technical errors and bugs cause Blink CCTVs to malfunction.
  • Therefore, power cycling is the only solution.
  • For this, reboot your cameras and Sync Module by powering off, unplugging them, and removing batteries. This will fix the common issues with the security devices.

Outdated camera firmware & App

  • Users commonly ignore the camera firmware update that leads to the connectivity issues.
  • Additionally, an outdated Blink Home Monitor application will also give rise to the not-working issues.
  • So, as advised, upgrade the camera firmware and app timely.

Inaccurate CCTV settings

  • Generally, due to incorrect camera settings, like low sensitivity, motion detection, etc., Blink camera live view not working.
  • Therefore, access the admin portal of the camera and check the camera configuration.
  • If primary settings are below than recommended, then change them to medium, neither too high nor too low.

Factory reset Blink cameras

Factory reset Blink cameras
  • If none of the given methods work to resolve the surveillance device not working or responding, then hard reset it.
  • You can perform a factory reset using the Blink Home Monitor application or through the button.
  • If you are still seeking help, connect with our expert team here.

Bottom Line

On the whole, this brief post outlines detailed information on the Blink camera not working  issue. Here, you will find the root causes and the elaborative troubleshooting tips to resolve this problem with your Blink CCTVs. Hopefully, this guide will assist you in eradicating this issue easily!

Categories