How to Fix Arlo Camera Blinking Blue Light?

The Arlo camera blinking blue light is a common matter among users. Therefore, it’s imperative to know the behavior of the Arlo camera LED status lights. The Arlo blue light blinking indicates several things. You can find out about the status of the Arlo camera just by looking at the LED indicators. So, if there’s something wrong with the camera, you can figure out the issue and resolve it appropriately.

If you are facing the Arlo blinking blue light issue, don’t worry! As this problem is renowned, you can resolve it simply. Today, we’ll go over the reasons for the Arlo blue light blinking, and afterward, we’ll discuss its troubleshooting methods.

Why is Arlo Blinking Blue Light?

It’s not only essential to know what the Arlo camera blinking blue light means, but you should know the behavior of the LEDs as well. If the light is blinking slowly or rapidly, each way signifies something else. The meaning of the Arlo blue light blinking is as follows:

Blinking Solid Blue Light

The solid Arlo blinking blue light occurs when the camera turns off to save the battery.
In this state, the camera will not record in order to save battery.

Flashing Slow Blue Light

The LED light blinks blue slowly on the Arlo Pro, Arlo Wire-free, and Arlo Pro 2 cameras, during the setup indicating the camera is forming a connection with the base station.
Moreover, the blue light blinking steadily on your Arlo Go means the camera is turning on.
When the Arlo camera blinking blue slowly on the Arlo Q and Arlo Q Plus, conveys that the camera is connecting to the internet.

Blinking Fast Blue Light

If the Arlo Wire-free, Arlo Pro, and Arlo Pro 2 cameras are blinking blue lights, means the connection between the camera and the base station is successful.
When the Arlo Go camera blinks blue light rapidly, indicates the camera either has a connection with the internet or it’s plugged into a charger.
Furthermore, when the Arlo Go camera blinks fast blue light means the camera is trying to form a connection with the servers.

Blinking Blue and Orange

The Arlo Go camera blinking blue and orange light conveys that the firmware of the camera is upgrading. Do not interrupt the camera in any way during this time period.
If the camera is just blinking amber swiftly, means the camera doesn’t have a connection with the WiFi.

Blinks Blue and Purple

The Arlo Go camera will blink blue and purple lights when the camera will be connected to the cellular network.
In this case, the camera doesn’t have a connection with the WiFi.

Now, you know what the Arlo camera blinking blue light means. Further, we can troubleshoot it accordingly now that we know what it means.

Troubleshooting Arlo Blinking Blue Light

To fix the Arlo camera blinking blue light, you can follow the below troubleshooting methods:

Shift the Router Closer to the Camera

If your camera is blinking blue with purple, you will have to troubleshoot it.
When the camera doesn’t have a connection with your WiFi, it will automatically connect to the cellular network.
Therefore, you need to connect your camera to your WiFi.
Check if the camera is inside the router’s range.
If the camera is too far from the router, the connection will break.
You can move the router nearer to the camera to ensure a proper connection.
After this, you can connect the camera to the router again.

Power Cycle the Camera

If the above method isn’t applicable to your camera, you can power cycle it.
To power cycle the camera, cut the power source of the camera and unplug it.
Now, you must leave the camera like that for some time.
After a while, you can power On the camera and plug it back in.

These methods should fix the Arlo camera blinking blue light.

FAQs

Arlo Camera Blinks Blue But Will Not Sync

When this happens, you can wait for 15-20 minutes before trying again with the sync. For most Arlo cameras, you don’t have to press the Sync button, as they sync automatically. When the LED light starts blinking rapidly, means the camera has begun syncing with the base station. After a few minutes, the sync should be complete.

Why is Arlo Blue Light Blinking When Charging?

The Arlo blue light blinking while charging indicates whether the camera is fully charged or not. When the camera blinks blue light for three seconds means the battery is low. However, when the camera blinks blue light for two seconds means the battery is full.

Arlo Base Station or Smart Hub Blinking Blue

When the Arlo base station blinks a blue light rapidly means the connection between the base station and the camera is successful. The blue solid light signifies the base station has a connection with your WiFi.

What is Arlo Camera Blinking Blue then Stop?

When this happens, it is a sign that the camera is either looking for a network to connect to or is in QR code scanning mode.

We hope you have understood what the Arlo blinking blue light indicates and how to troubleshoot the issue accurately. If there are any other issues you are facing with your Arlo camera, reach out to our team right now!