How-to-Fix-Arlo-Camera-Not-Detecting-Motion

Arlo Camera Not Detecting Motion! How to Fix it?

The Arlo Cameras are widely used in homes and industries due to their outstanding qualities. The high-class range of these cameras presents different benefits including two-way audio,  huge cloud storage, motion detection, etc. Despite these advantages, users face several issues like the Arlo camera not detecting motion and more.

However, many causes are responsible for motion detection issues that disrupt the functioning of the Arlo Camera. Therefore, it is needed to fix the issue timely for optimal camera performance. In addition, if you are seeking assistance with the Arlo camera does not detect motion issues,  then you must read this guide. Here, you will understand the reasons and the strategies to fix it.

Why is My Arlo Camera Not Detecting Motion?

Moreover, the  Arlo camera does not detect motion issues are very common and occur due to the:

  • Poor or no internet
  • Improper modes and rules configurations
  • Incorrect configuration
  • Inactive subscription
  • Motion sensitivity is too low
  • Technical Glitches & bugs

Troubleshooting Steps for Arlo Motion Detection Not Working

Stabilize the Internet Connection

Make sure a stable internet connection on your networking device to prevent issues like Arlo motion detection not working, etc. So, opt for the wired network for a seamless browsing experience.

Reconfigure the Modes and Rules

Access the admin panel of the Arlo camera and visit Settings. Here, go to the Mode and Rules option and enable recording and motion detection. Also, configure further settings, like motion sensitivity, Armed or disarmed, etc.

Relocate the Router

Relocate the networking device to the central location for better connectivity to cover the entire area you want to be under surveillance. So, to avoid dropping connection or not connecting issues relocating the device is one of the major steps.

Firmware Update

Check the firmware updates by accessing the login page of your surveillance camera settings. If the window prompts for a firmware upgrade, follow the instructions to complete this procedure.

Power Cycle the Device

If the device performance is poor due to Internal glitches & bugs while working, then power cycle the device to get rid of all the issues. For this, unplug the connected devices from the power supply for 30 sec. and plug them back.

Renew Your Arlo Subscription

If the subscription expires then the Arlo camera may not detect motion. Hence, renew your Arlo subscription by opening and following the guidelines on the Arlo app on your smartphone.

Factory Reset the Device

If the above-mentioned steps don’t work to resolve the Arlo motion detection not working issue, then hard reset your networking device. It will revert the router to its default settings and you have to reconfigure the device from scratch. To know the complete master reset process, reach out to our professionals!

Final Thoughts

All things considered, you understand the causes and the troubleshooting methods for the  Arlo camera not detecting motion issues. Before going through the solution, you must look at the causes first and then proceed with the resolutions.

If you are still willing to know more about the Arlo Camera, then get in touch with our experts on our website!

FAQs

Go to the camera settings to adjust the Motion Sensitivity on the Arlo Camera. Here, click on the default mode settings under the Devices. Here, enable & set the motion detection slider according to the required sensitivity level.

The Arlo Camera is not alert on motion detection because the Arlo notifications are disabled. So, enable the Arlo notifications by visiting the mobile settings to alert your smart camera.

Yes, but it is available in the few specific camera models that support Arlo Foresight. The camera can capture the smaller clips of 15-20 seconds by enabling the Continuous recording option in Settings.

The Arlo Camera records 10- 15 seconds smaller clips at a time when the camera is not detecting motion.

Categories