Power Cycle Wyze Camera

How to Power Cycle Wyze Camera?

Wyze cameras can be among the best home security solutions you can get for your home. The cameras are easy to setuppower cycle Wyze camera and operate as long as you follow the right steps. Incorrect network configuration and other errors may give rise to issues beyond repair. To avoid them, you can always follow the set procedure of steps. 

However, issues related to firmware or hardware and more may still arise. Now, you can always follow some basic troubleshooting steps to resolve issues. And among all these is the power cycle process that can surely resolve just about every issue. If you are having trouble resolving issues, learning how to power cycle Wyze camera can help. This blog will walk you through the easy steps for the power cycle process. 

Wyze Cam Power Cycle- How can it help?

Your Wyze camera can come across service issues where some features of your camera may cease to work. Whenever you encounter such issues, the best way around is to power cycle Wyze camera. For instance, a majority of users come across the Wyze Cam Error Code 90 i.e. due to a communication issue. Now, the issue generally arises when the camera cannot reach the Wyze service servers, and the Wyze camera power cycle can help resolve the same.

Power cycling means turning off the camera and turning it back on. Doing so initiates the device’s configuration parameters while also recovering the camera from an unresponsive state. Power cycling also reset the network activity inside the camera and can be used as an effective remedy to troubleshoot issues with the device. Whether the online status is not visible and the live stream is working or vice versa. Or, maybe the settings are not being saved even after repeated edits, you don’t see any motion events being alerted even after several people have moved in front of the camera, and several other issues can be resolved with the Wyze Cam power cycle process.

In essence, power cycling your Wyze camera should be the first step when looking for a solution to resolve issues with it. 

How to Power Cycle a Wyze Camera?

It’s simple to power cycle your Wyze Cam. It often solves the software issues you may encounter on the camera. If you’re experiencing issues in your camera’s Wyze Cam then power cycling might be the solution. Here are a few steps to follow for power cycling your Wyze camera configuration:

  • Unplug any power connector cable that is attached to the camera.
  • Then, wait for the camera to boot up again once you plug in the power adapter again.
  • Once the camera is powered on, disconnect it once more.
  • Plug the power adapter into the camera again and watch for the camera’s second boot.
  • When the camera is ready to go, unplug the power adapter, so you can operate the camera like you normally do.

 

It is also possible to use the power switch located on the back of the camera to shut off for 30 seconds, and then complete the power cycle.

How to Power Cycle Wyze Camera Outdoor?

The steps to Power cycle Wyze Camera Outdoor are different than they are for V1/V2 and PAN models as the former has an internal battery. If you are using the Wyze Camera Outdoor, you can follow the simple steps to power cycle it: 

  • Locate the power switch on the rear and turn it to the OFF position.
  • If the camera is connected to a power source, unplug the power cord and then wait for about 30 seconds.
  • Now, plug the cable back in and turn the power switch position to the ON position.

Wyze Cam Power Cycle- Remote Process

The Wyze camera app can also be used for the power cycle process. If you have the app launch it and follow the instructions given:

  • From the main home screen, tap on the Live Stream option.
  • Select the Gear icon or Settings option and then select the Restart Device option.

Your Wyze camera will now restart.

Alternatives to Wyze Camera Power Cycle

While Power cycling your Wyze camera might seem like a lucrative option, it doesn’t always have to be the only one. There are other troubleshooting steps available that you can follow if your Wyze Cam isn’t functioning the way it should:

  • For 30 seconds, disconnect your Wyze Base station from its power source and then reboot it.
  • Each of the Wyze Cam and Base Station should have a status light. Both of them should be in clear blue. When they blink, it indicates they’re still searching for a connection.
  • Start the Wyze camera app and then tap on the connected Base Station. If the signal strength is less than one bar, you can check the strength of the signal as well as move the Base Station closer if needed.
  • Wyze Camera can be charged for up to four hours. The mobile app is able to check battery levels when required.
  • Visit the Wyze application and sign in using your Wyze Camera log-in page. Once you’re logged in, select the Accounts tab, then Firmware and Update. The correct software will ensure that devices can communicate without issue.
Need more help with Wyze Camera Power Cycle Process? Reach out to the team now!