How to Fix Arlo Essential Camera Blinking Orange Twice?
In this tech era, Arlo essential cameras are one of the smart security solutions to secure your premises. These are equipped with the latest wireless technology but show issues sometimes, such as the Arlo Essential camera blinking orange twice. However, flashing orange is one of the common problems that users experience with their Arlo security devices.
Likewise, this issue occurs primarily if the security cam fails to connect to the internet or is unable to sync to the base station, and the camera is in reset mode. In addition, the Arlo Essential camera flashing orange twice due to the low camera batteries. So, if you want to get further information regarding the same, then, stay on this page. Here, you find the reasons as well as easy troubleshooting methods to resolve it.
Why is My Arlo Camera Flashing Orange?
Additionally, several reasons are responsible for the blinking amber LED on the Arlo surveillance gadgets. The most common reasons for the orange LED flashing twice on the camera are internet disconnectivity and the reset process being ongoing on the surveillance device.
Further, you understand the slow and fast blinking status and reasons behind the Arlo Essential camera’s orange LED in the given section, so take a look beneath:
Indoor Camera
Slow blinking: The camera fails to set a connection with the existing wifi or there is a setup error.
Slower Blinking with closed shutter: The surveillance device is offline.
Outdoor Security Camera
Slow Flashing: The batteries are too low for your camera.
Fast Blinking: The camera fails to Sync with the Arlo Base station or the Smart Hub.
Troubleshooting Arlo Essential Camera Blinking Orange Twice
Moreover, the issues are very common among digital devices, similarly, these security devices have as discussed above. Further, it is necessary to understand the reason behind the Arlo Essential camera orange light. However, it is time to resolve them timely for the optimum performance of the surveillance device. In this section, we share the effective troubleshooting methods to fix the flashing LED, have a look beneath:
Resync the Camera
First and foremost, check that your security camera is connected to the wireless network through the smart home/base station or directly joins it. If not, then use the ethernet cables to stabilize the internet and resync the camera. If using the Base station/Smarthub, then place the camera and Base station/Smart Hub closer to the router.
Eliminate the Signal Interferences
Sometimes the Arlo Essential camera blinking orange issue appears if signal barriers are present there. These are microwaves, mirrors, baby monitors, cordless phones, furniture, and more. So, eliminate them or relocate the camera and base station/smart hub away from the signal obstructions.
Place the Security Device Within the Network Range
Make sure your camera and the Base station/Smart Hub are placed within the router’s networking range. If these are farther away, then relocate them and put them closer to the networking device and reconnect. This may help to resolve the Arlo Essential camera blinking orange twice error.
Charge the Camera Batteries
If the batteries of the security gadgets are not charged completely, then the orange light issue is very common. Similarly, if you do not charge them after the recommended period, then Arlo Essential camera flashing orange twice is most general. Hence, charge the batteries of the surveillance device full if it is brand new. Similarly, also charge the camera batteries after the given time such as 3 or 6 months.
Ensure Adequate Power Supply
If you are using the wired Arlo surveillance devices, then make sure you are using the original adapter and power cables first. Next, check that the electrical outlets are not burnt or broken. These should provide the necessary voltage required to utilize the security device. Also, ensure a sufficient power supply to the camera and the base station.
Factory Reset the Arlo camera
If none of the given methods work, then factory reset the security camera. You can use the web GUI, App, and button method to carry out the reset procedure or reach out to us to know more.
If Still want to know more? Drop us a line here!