Arlo Batteries: Everything about Arlo Camera Batteries

Arlo cameras are immensely reliable security cameras that you can trust for the protection of your home. You can watch over your home from anywhere and anytime. Not limited to that, you also receive alerts regarding any activity that is perceived as unusual by the camera. You just need to provide a sufficient source of power or you can use Arlo camera batteries for the new cameras.

Now, you don’t have to have your camera plugged in all the time. As the latest Arlo cameras don’t require any power source, they are battery-powered. Now, if you want to know about the Arlo Pro camera batteries, we’ve got you. Because in this guide we’ll explain everything you need to know about the Arlo GO camera batteries.

How to Charge Arlo Camera Batteries?

When you have cameras that are powered by batteries, it’s important to know how to charge them. There are two ways you can charge batteries for Arlo camera. These ways are as follows:

In-Camera Charging Batteries

First, if the camera’s outside, you need to bring it inside. You need to ensure that you charge your camera inside even if there’s a power outlet outside. You must choose a secure place to charge the camera. Somewhere it won’t be interrupted or trampled. You can charge it on a table or a countertop. Follow the steps below:

First of all, plug the USB cable into the camera and then into the power adapter. You can find the slot of the plug at the back. Ensure to only use the cable provided, as the other might damage the battery or the camera.
Next, plug the adapter into a power source. Once the battery starts charging, the LED light on the camera will blink blue. If the light starts flashing blue then leave it be. If the light doesn’t blink blue, then check the connections.
Then, when the camera LED light turns solid blue, you can unplug it. The solid blue light indicates that it is fully charged. When the camera’s fully charged, unplug it and install the camera back at its original place. It usually takes 2-4 hours to charge, based on how low the battery is.

Charge through the Arlo Base Station

To charge the Arlo camera batteries using the base station, you need to plug in the charging station. You just need to plug the charging cable into the charging station and then into the wall adapter and then plug in the adapter in an electrical outlet. Follow the steps below:

First, you need to open the battery section of the camera. It’s usually on top of the camera. You need to find a latch and press it down and slide out the battery.
Next, place the batter in the charging bay, and when it clicks in it’s properly placed. You need to ensure the Arlo symbol is on the front, as it’s the right way. There are two charging bays, so you can charge two batteries at a time.
Then, leave the battery in till the LED light on the base station turns solid green. If the LED light is yellow, indicates it’s still charging. It will approximately 2-4 hours to charge completely. If the LED light blinks orange, indicates the battery isn’t charging.
When the battery has finished charging, you can remove it. You can press it till it clicks, indicating it is free.

These are the ways to charge your batteries for Arlo camera.

How Long Does an Arlo Camera Battery Last?

Arlo GO camera batteries can last up to 2 to 3 months if they are under normal usage of five minutes of recording per day. Whereas, the Arlo wire-less camera batteries can last for a span of 4 to 6 months under normal usage. However, there are various other factors that could affect the Arlo Pro camera batteries.

How to Replace the Camera Battery?

In order to replace the batteries for Arlo camera, you need to remove the battery first. You need to carefully remove the battery from the camera housing. The camera housing is a preservative shell. You can replace the battery by following the steps below:

First, you need to press the button on the charging port under the camera.
Next, draw the camera until it’s completely removed from the housing.
Then, you can remove the battery by tugging it until it slides right out of the camera.
Now, you need to align the battery and carefully place it inside the battery compartment. The camera LED will blink blue.
Then, insert the camera back into the camera housing till it is clicked into place. Ensure to hold the camera from the right and the left side. Do not put pressure on the lens or the soft area below it.

This is how you can replace Arlo essential camera batteries.

Why Does the Arlo Camera Not Sync After Battery Change?

If after changing the Arlo Pro camera batteries your Arlo camera isn’t syncing with the base station, then you need to ensure that the base station is properly installed and working. You need to check that the Arlo essential camera batteries are fully charged. You can sync the camera again with the camera. Follow the steps below to syn it:

First, press the latch and pull it back to open the battery compartment.
Next, slide the battery into the compartment till it clicks, and then close the door.
Then, keep the camera closer to the base station.
After that, press the ‘Sync’ button on the base station’s side. After two seconds release the button. Ensure to not press the button for too long.
When the sync status LED starts blinking green.
Then, press the camera’s ‘Sync’ button. After two seconds release it. The blue LED on the camera will start blinking swiftly.
If the camera LED on the base station turns green, indicates the camera is successfully synced to the base station.

If you want to syn more cameras to the base station, you can repeat this process.

Why is Arlo Camera Battery Draining Fast?

There could be several factors responsible for the Arlo GO camera batteries draining quickly. These factors are written below:

Use Better Arlo Essential Camera Batteries

The life of your battery depends a lot on your camera’s settings. Therefore, if you set up your camera properly, the battery would last much longer. Setting your camera to acquire quality outcomes will also maximize the life of your Arlo Go camera batteries.

Use Suitable Arlo Pro Camera Batteries

It is advised to only use the Arlo camera batteries, that are provided with your camera. Or only use the ones you bought from the Arlo brand. As the other batteries won’t work as much and might also damage the camera.

Only Record Short Videos

If you record videos from the Arlo cameras, only record short videos. You can do this by configuring the settings of the camera. As long videos will shorten the life of your Arlo essential camera batteries.

Temperature Around the Camera

The temperature of the camera’s setting has an immense effect on your battery’s life. In cold weather, your camera might lose battery more quickly. Therefore, the temperature of the camera’s settings should not precede 32 degrees celsius. This temperature makes it difficult for the camera to record. It’s also recommended to keep the camera in low light for the infrared sensors to work correctly.

Signal Strength

You must place the camera 90 meters above the base, this will make the Arlo Pro camera batteries last longer. And the chances of the device getting stolen or tampered with will lessen.

These are the factors affecting the life of your batteries for Arlo cameras.

How Can I Extend Arlo Camera Battery Life?

You can extend the life of your Arlo camera batteries by following the mentioned tips:

You need to only use the batteries provided along with the camera or the batteries from the Arlo brand.
Ensure that the Arlo system’s firmware is updated to the latest firmware. If your camera’s connected to the base station, it will automatically update the firmware.
Balance the settings of the Arlo camera perfectly to make the battery last longer.
Configure the settings to record short videos. Long videos will drain the battery faster.
You need to check if the camera is receiving a stable network from your Wi-Fi.
Do not locate the Arlo system close to various Wi-Fi routers as it will affect its connectivity.

These are some tips you can keep in mind to ensure the Arlo batteries last longer.

Are All the Arlo Batteries Rechargeable?

Except for the Arlo Wire-Free camera, every other battery-powered Arlo camera’s batteries are rechargeable. You will receive batteries for all the Arlo cameras along with them. Ensure to only use those, to ensure your camera works longer.

This is everything you need to know about the Arlo camera batteries. If you are facing any issues with your Arlo camera, you can reach out to our team. We’ll assist you with figuring out a solution.