How to Fix Eufy Camera Red Light?
The Eufy camera red light occurs when your camera is not working properly. You will observe your Eufy blinking red if it is not recording videos or it is not connected to the internet connection. The Eufy security camera red light indicates that something is not right with your camera and that it requires an immediate attention.
Well, there is no issue that can’t be fixed. All you have to do is just follow the right tips and tricks and perform the steps in a correct manner. The Eufy camera is one of the most amazing cameras on the market. Configuring the camera and troubleshooting for the issues is very easy.
This post will take you through the steps to fix the Eufy camera red light. However, before you go about the troubleshooting steps, we want you to learn about some of the most common reasons behind this issue. So let’s start this topic by discussing the main reasons behind the Eufy blinking red issue.
Why is the Eufy Camera Blinking Red Light?
If you are wondering why does the Eufy security camera red blink every now and again, let us tell you. The Eufy camera red light blinks when your camera is suffering through some technical problems. We have put down some of the most common reasons for red light blinking issue on the camera:
- Eufy camera’s firmware outdated
- Camera not within the range of the network
- Multiple obstructions or interference around the camera
- Eufy camera offline
- Discharged battery on your camera
- Network modifications
Steps to Fix Red Light on Eufy Security Camera
Here are some of the most important tips that will help you get rid of the Eufy camera red light issue.
1. Connect to Internet
First of all, make sure the wireless router is connected to the internet service. For that, you need to check whether the modem is connected to the router or not. The network cables should not be showing any signs of wear and tear.
2. Check Ethernet Cable Connection
Make sure the Ethernet cable is connected to the right port. You should only use an RJ45 Ethernet cable to connect your modem to the router. If the Ethernet cable is faulty, make sure you replace it with a new one.
3. Inspect the Power Adapter
The power adapter that charges the camera should be working perfectly fine. In case the power adapter is defective, the battery of your camera may not charge. You will keep the camera on charge and the battery won’t charge.
4. Check Router Network Signal
If you still observe Eufy blinking red, make sure you bring your wireless router a little closer to the camera. If you can’t move your router, you need to relocate your Eufy camera. It is important to keep your camera well within the range of a wireless router.
5. Reset and Reconfigure the Device
If you still come across the Eufy red light issue, you need to go with the last option to reset the device. Once you reset your camera, you must reconfigure it using the Eufy camera app. Press and hold the reset button on the camera or you can also use the Eufy app to remove the camera from the app. Once the camera reverts to the factory default settings, you need to reconfigure it using the same app
Finally, the Eufy security camera red light issue will go off from your camera. Your camera will start working without any hassle.
Final thoughts
This page was all about the Eufy camera red light issue and why it shows up on your camera all of a sudden. If you observe Eufy blinking red on your camera, make sure you do not panic. You must try to identify the root cause of the issue on your camera and then proceed with the troubleshooting steps.
Once you are done with the troubleshooting steps, the camera will start working as usual. We hope that this page helped you resolve the issue and get rid of all problems on your camera. If you still face any issue or have any doubts, please contact our support team for more help.